Checking The Touch Finder Battery Level; Changing The Sensor Name; Checking Available Memory In The Sensor; Correcting The Touch Screen Positions Of The Touch Finder - Omron FQ2-S Series User Manual

Checking the Touch Finder Battery Level

(Setup Mode or Run Mode) − [TF settings] − [Battery level]
Important
• The battery level is displayed only for a Touch Finder with a DC/AC/battery power supply (FQ2-D31).
• The settings will be lost if the battery runs out while you are making the settings. If the battery level is low,
save the settings and charge the battery immediately.

Changing the Sensor Name

An alphanumeric name can be assigned to a Sensor to make it easier to recognize. This is convenient when
more than one Sensor is connected.
(Setup Mode) − [Sensor settings] − [Information] − [ ] − [Rename]

Checking Available Memory in the Sensor

If a setting cannot be made, check the amount of memory that is available in the Sensor.
(Setup Mode) − [Sensor settings] − [Information] − [ ] − [Memory state]

Correcting the Touch Screen Positions of the Touch Finder

Use this function to correct the touch screen positions if they are offset from the opposite position.
(Setup Mode) − [TF settings] − [Touch screen calib]

Setting the Resolution of Measurement Objects Displayed on the PC Tool

Use this function to set the resolution of measurement object that are displayed on the Touch Finder on the
computer.
(Run Mode) − [TF settings] − [Resolution]

Changing the Sensor's BUSY Indicator

You can change the BUSY indicator to a RUN indicator.
[In/Out] − [I/O setting] − [I/O setting] − [Output] − [BUSY LED]

Setting the Inspection Timeout Time (FQ2-S4 series or FQ2-CH series only)

The time after which inspection times out can be set (msec).
(Setup Mode) − [Sensor settings] − [Timeout]
FQ2-S/CH User's Manual Functions Related to the System
295