Changing Output Signal Output Conditions Selecting The On Conditions; Changing Output Signal Output Conditions; Selecting The On Conditions; One-Shot Output - Omron ZFV-C Manual

Changing OUTPUT Signal Output Conditions

Selecting the ON Conditions

Set whether to turn the OUTPUT signal ON when OK is judged or when NG is judged.
MENU mode-[SYS2]-[OUTPUT]-[ON STATUS]
Setting
OK ON
NG ON (default)

One-shot Output

OUTPUT turns ON for only the preset output time from when the OUTPUT signal turns
ON.
● Synchronous measurement
OFF
TRG
ON
OFF
OUTPUT
ON
● Continuous measurement
OUTPUT ON at OK judgment
Judgment NG
OFF
OUTPUT
ON

Changing OUTPUT Signal Output Conditions

Turns the OUTPUT signal ON when OK is judged.
Turns the OUTPUT signal ON when NG is judged.
Measurement
Judgment OK
Output time
Details
Output time
Judgment NG
Section 5
ZFV-C
107
User's Manual