Dhcp Relay Agent Configuration Task List; Enabling Dhcp; Enabling The Dhcp Relay Agent On An Interface - HP 3600 v2 Series Configuration Manual

If a client's
requesting
message has...

DHCP relay agent configuration task list

Task

Enabling DHCP

Enabling the DHCP relay agent on an interface

Correlating a DHCP server group with a relay agent interface
Configuring the DHCP relay agent security functions
Enabling offline detection
Configuring the DHCP relay agent to release an IP address
Configuring the DHCP relay agent to support Option 82
Setting the DSCP value for DHCP packets
Enabling DHCP
Enable DHCP before performing other configurations related to the DHCP relay agent.
To enable DHCP:
Step
1. Enter system view.
2. Enable DHCP.
Enabling the DHCP relay agent on an interface
With the DHCP relay agent enabled, an interface forwards incoming DHCP requests to a DHCP server
for address allocation.
The IP address pool containing the IP address of the DHCP relay agent enabled interface must be
configured on the DHCP server. Otherwise, the DHCP clients connected to the relay agent cannot obtain
correct IP addresses.
To enable the DHCP relay agent on an interface:
Step
1. Enter system view.
Handling
Padding format
strategy
N/A verbose
N/A user-defined
Command
system-view
dhcp enable
Command
system-view
60
The DHCP relay agent will...
Forward the message after adding the
Option 82 padded in verbose format.
Forward the message after adding the
user-defined Option 82.
Remarks
Required
Required
Required
Optional
Optional
Optional
Optional
Optional
Remarks
N/A
Disabled by default
Remarks
N/A