Motorola RFS Series Reference Manual page 871

add-vlan [<1-4094>|
<vlan-list>]
{limit <1-4094>}
answer-bcast-ess
authentication-type
[eap|hotspot|kerberos|
mac-auth|none]
Instead of starting a new VLAN assignment for given
WLAN, this command adds a VLAN assignment to an
existing VLAN assignment. All prior VLAN settings are
retained.
• [<1-4094>|<vlan-list>] – Sets the VLAN range list <vlan-
list>. It can be either a single index or a list (1,3,7) or
range (3-7)
• limit – Sets user limits on VLANs to a value in the
range <1-4094> for this WLAN
Note: The [no] form of add-vlan command deletes
the specified VLAN mapping over the specified WLAN
range list.
If the specified mapping does not exist for a particular
WLAN, a "specified vlan does not exists" message
displays.
The delete action continues on remaining VLANs. If all the
VLANs are deleted a default VLAN assignment takes effect
Allows this WLAN to respond to probes for broadcast ESS
Sets the authentication type for this WLAN.
• eap – EAP authentication (802.1X)
• hotspot – Web based authentication
• kerberos – Kerberos authentication (encryption will
change to WEP128 if its not already wep128/keyguard)
• mac-auth – MAC authentication (RADIUS lookup of MAC
address)
• none – No authentication is used
Wireless Instance 20-125