Show - Motorola RFS Series Reference Manual

8-10 Motorola RF Switch CLI Reference Guide

8.1.8 show


Crypto Peer Config Commands
Displays current system information running on the switch
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
Syntax
show <paramater>
Parameters
?
Example
RFSwitch(config-crypto-peer)#show ?
access-list
aclstats
alarm-log
system
autoinstall
SWITCH NOTE: The following commands display only for
RFS6000 and RFS4000:
• power
The following commands display only for RFS7000 :
• port-channel
• static-channel-group
NOTE: For more details on the show command see show on page 2-38
Displays all the parameters for which information can be
viewed using the show command.
Internet Protocol (IP)
Show ACL Statistics information
Display all alarms currently in the
autoinstall configuration