20.1.54 non-preferred-ap-attempts-threshold
Wireless Configuration Commands
Displays the number of attempts after which switch will adopt non preferred APs
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
Syntax
RFS6000(config-wireless)non-preferred-ap-attempts-threshold
<0-20>
Parameters
non-preferred-ap-
attempts-threshold
<0-20>
Example
RFS7000(config-wireless)#non-preferred-ap-attempts-threshold
9
RFS7000(config-wireless)#
Displays the number of attempts after which switch will
adopt non preferred APs
• <0-20> – The number of attempts with numeric value in
the range of <0-20> for this wireless-switch
Wireless Instance
20-155