Motorola RFS Series Reference Manual page 884

20-138 Motorola RF Switch CLI Reference Guide
qos
[classification |
mcast-with-dot11i|
mcast1|mcast2|
prioritize-voice|
rate-limit|svp|weight|
wmm]
Quality of Service commands
• classification [background|best-effort|video|voice|wmm]
– Select how traffic on this WLAN is classified (relative
prioritization on the access port)
• low – All traffic on this wlan is treated as low priority
traffic (Background)
• normal – All traffic on this wlan is treated with normal
priority (Best Effort).
• video – All traffic on this wlan is treated as Video
• voice – All traffic on this wlan is treated as Voice
• wmm – Use WMM based classification, using DSCP
or 802.1p tags to classify traffic into different queues
• mcast-with-dot11i enable – Enables multicast mask with
dot11i
• [mcast1|mcast2] <MAC> – Sets multicast masks
• mcast1 <MAC> – Sets multicast mask for egress
prioritization
• mcast2 <MAC> – Sets multicast mask for egress
prioritization
• <MAC> – MAC address
• prioritize-voice – Prioritize voice frames over general
data frames (applies to non-WMM mobile-unit)