Motorola RFS Series Reference Manual page 358

5-82 Motorola RF Switch CLI Reference Guide
server
trusted-key <1-65534>
Example
RFSwitch(config)#ntp peer ?
WORD Name/IP address of peer
RFSwitch(config)#ntp peer TestPeer ?
autokey
key
prefer
version
<cr>
• prefer {version <1-4>} – Sets the preference for autokey.
Optionally set the NTP version to use
• version <1-4> {prefer} – Sets the NTP version to use.
Optionally set this peer as preferred peer
Configures the NTP server.
• <peer-name-or-IP> – Sets the IP address or name of the
peer
• autokey {[prefer {version <1-4>}|version <1-4> {prefer}]}
– Configures an autokey peer authentication scheme
• prefer – Optional. Prefers this peer when possible
• version <1-4> – Configures the NTP version
• key <1-65534> {[prefer {version <1-4>}|version <1-4>
{prefer}]} – Configures the autokey peer authentication
key
• key <1-65535> – Sets the peer authentication key
number
• prefer {version <1-4>} – Sets the preference for autokey.
Optionally set the NTP version to use
• version <1-4> {prefer} – Sets the NTP version. Optionally
set this peer as preferred peer
Key numbers for trusted time sources.
• <1-65534> – Defines the Key number
Configure autokey peer authentication scheme
Configure peer authentication key
Prefer this peer when possible
Configure NTP version