Motorola RFS Series Reference Manual page 876

20-130 Motorola RF Switch CLI Reference Guide
hotspot [allow-eap|
allow-
list|authentication|dn-
whitelist|cache-ageout|
connection-mode|
ntf-logout-port|portal-
api|pre-auth-vlan|
redirect-to-hostname|
simultaneous-users|
query|webpage|
webpage-location]
Modifies hotspot related parameters
• allow-eap – allow EAP authentication in addition to web
based login
• allow-list <1-32> <IP> – Specifies the allowed list that
user can access without prior authentication. Typically
this would be the external web-page's IP address
• <1-32> – Allow-list Rule index value
• <IP> – Allow-list IP address. This parameter refers to
a specific IP address to which unauthenticated
mobile-units can connect to. It does not specify a
network or a subnet
• authentication [free|radius] – Sets authentication type
for singed users
• free – Provides the user a guest login option.
• radius – Provides radius authentication option to login
• dns-whitelist <WORD> – Configures host whitelist.
• LINE – Whitelist name.
• cache-ageout <5-86400> – The time duration in seconds
to ageout the cache after MU disassociation
• connection-mode [https|https] – Configures the
connection mode as http or https
• http – Specifies connection-mode as http
• https – Specifies connection-mode as https
• ntf-logout-port <0-65535> – Configures the port to send
the NTF-Logout when the device is in external hotspot
mode
• Portal-api [enable|shared-secret <LINE>] – Configures
the HTTPS-POST API interface used by external web
portals
• enable – Enables support for the HTTPS-POST API.
• shared-secret <LINE> – Configures the security
shared-secret between the web portal and the switch