Motorola RFS Series Reference Manual page 988

25-12 Motorola RF Switch CLI Reference Guide
Example
RFSwitch(config-wireless-smart-rf)#no ?
assignable-power-range
auto-assign
beauto-assigned
extensive-scan
everytx-power level
hold-time
detection.
number-of-rescuers
rescuers to cover faulty radio
radio
scan-dwell-
Resets the time a scan dwells on a channel during scan
time <1-10>
schedule-
Resets the calibration schedule parameters
calibrate
• enable – Disables the calibration schedule feature
[enable|interva
• interval – Negates the calibration schedule interval
l|
• start-time – Negates the calibration schedule start time
start-time]
service smart-
Resets the Smart RF related service commands
rf
• smart-rf max-history – Resets the maximum number
[max-
history|replay
• replay enable – Disables the replay mode
(enable)|rescue
• rescue <WORD> – Removes rescue operation
]
select-
Revert selected- channels to default
channels
• WORD– A comma-separated list of channels
<WORD>
smart-rf-
Disables the feature
module enable
verbose enable Disables the verbose mode of recording every assignment
history entries
• WORD – A single radio MAC address
reset the power range to default
disable individual RF parameters to
extensive scan mode, calibrate at
The number of seconds to disable
interference avoidance after a
This prevents a radio from changing
channels continuously
revert to default the number of
Radio related commands