How To Use This Guide - Motorola RFS Series Reference Manual

xx Motorola RF Switch CLI Reference Guide
The syntax, parameters and descriptions within this guide can also be used generically for
a RFS7000, RFS6000 and RFS4000 model switch. However, some subtle differences do
exist amongst these switches. These differences are strongly noted within the specific
commands impacted. When these differences are noted, the options available to each
switch baseline are described in detail.

How to Use this Guide

This guide will help you implement, configure, and administer the switch and associated
network elements. This guide is organized into the following sections:
Chapter
Chapter 1, "Introduction"
Chapter 2, "Common
Commands"
Chapter 3, "User Exec
Commands"
Chapter 4, "Privileged Exec
Commands"
Chapter 5, "Global
Configuration Commands"
Chapter 6, "Crypto-isakmp
Instance"
Chapter 7, "Crypto-group
Instance"
Chapter 8, "Crypto-peer
Instance"
Chapter 9, "Crypto-ipsec
Instance"
Jump to this section if you want to...
Introduces the overall feature-set of the switches, as
well as the different configuration options available.
Summarizes the commands common amongst many
contexts and instance contexts within the switch CLI.
Summarize the User Exec commands within the
switch CLI.
Summarizes the Priv Exec commands within the switch
CLI.
Summarizes the Global Config commands within the
switch CLI.
Summarizes the
(crypto-isakmp)
the switch CLI.
Summarizes the
(crypto-group)
the switch CLI.
Summarizes the
(crypto-peer)
switch CLI.
Summarizes the
(crypto-ipsec)
the switch CLI.
commands within
commands within
commands within the
commands within