Show - Motorola RFS Series Reference Manual

20-106 Motorola RF Switch CLI Reference Guide

20.1.47 show


Wireless Configuration Commands
Displays current system information running on the switch
For other show commands, see Chapter 2, Section 2.1.6 show on page 2-38.
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
Syntax
show <paramater>
Parameters
?
Example
RFSwitch(config-wireless)#show ?
aap-wlan-acl
aap-wlan-acl-stats
statistics
' access-list
aclstats
information
alarm-log
currently in the system
autoinstall
banner
Login banner
SWITCH NOTE: The following commands display only for
RFS6000 and RFS4000:
• power
The following commands display only for RFS7000 and RFS4000:
• port-channel
• static-channel-group
Displays all the parameters for which information can be
viewed using the show command
wlan based acl
IP filtering wlan based
Internet Protocol (IP)
Show ACL Statistics
Display all alarms
autoinstall configuration
Display Message of the Day