Motorola RFS Series Reference Manual page 912

21-8 Motorola RF Switch CLI Reference Guide
Use
[no] enable
configuration and disable it.
Example
RFS7000(config-rtls)#ekahau enable
RFS7000(config-rtls)#
RFS7000(config-rtls)#ekahau engine ip 10.1.1.1 port 1001
RFS7000(config-rtls)#
RFS7000(config-rtls)#ekahau multicast-listen-addr 01-18-8E-
00-00-00
RFS7000(config-rtls)#
21.1.9 no

RTLS Config Commands
Negates a RTLS command or set its defaults
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
Syntax
no [aeroscout|ekahau|reference-tag|service|site|
switch|ap|zone]
Parameters
engine ip<IP>
Configures the IP address and port number of the external
port <Port>
ekahau RTLS engine
• ip – Configures external location engine IP address
• port <1000-9000> – Configure external location engine
multicast-
Configures multicast MAC address to which ekahau tags
listen-addr
packets are destined
<MAC>
• <MAC> – Multicast MAC address
and
[no] engine <ip><port>
port
to undo the RTLS engine
ekahau