Motorola RFS Series Reference Manual page 747

Use the
(config-wireless)
associated with the switch.
To navigate to this instance, use the command from the Global Config mode.
RFSwitch(config)#wireless
RFSwitch(config-wireless)#
20.1 Wireless Configuration Commands
This table summarizes
Command
aap
admission-control
adopt-unconf-radio
adoption-pref-id
ap
Wireless Instance
instance to configure local RADIUS server parameters
(config-wireless)
Description
Sets Adaptive AP (AAP) related commands
Enable admission control across all radios
Adopts a radio even if its not yet configured.
The default templates can be used for
configuration.
Used as a preference identifier for this switch.
All radios configured with this preference
identifier are more likely to be adopted by this
switch.
Displays access port related commands
commands:
Ref.
page 20-6
page 20-9
page 20-10
page 20-11
page 20-12