Motorola RFS Series Reference Manual page 891

vlan [<1-4094>|
<vlan-list>]
{limit <0-8192>}
wep128 [key|phrase|
wep-default-key]
Sets the VLAN assignment of this WLAN. This command
starts a new VLAN assignment for a WLAN index. All prior
VLAN settings are erased.
• [<1-4094>|<vlan-list>] –Establishes the VLAN range list
It can be either a single index, a list (1,3,7) or a range (3-
7)
• limit <0 -8192> – Sets user limits on VLANs for this
WLAN
Configures WEP128 parameters.
• key <1-4> [ascii|hex] – Configures pre-shared hex keys
• ascii [0 <key>|1 <key>|<key>] – Sets keys as ascii
characters (5 characters for wep64, 13 for wep128)
• hex [0 <key>|1 <key>|<key>] – Sets keys as
hexadecimal characters (10 characters for wep64, 26
for wep128)
• 0 <key> – Password is specified unencrypted
• 2 <key> – Password is encrypted with password-
encryption secret
• <key> – Key (10 hex or 5 ascii characters for wep64,
26 hex or 13 ascii characters for wep128)
• phrase <phrase> – Specifies a passphrase from which
keys are to be derived
• <phrase> – Sets the passphrase (between 4 and 32
characters)
• wep-default-key <1-4> – Defines the key index used for
transmission from AP to MU
Wireless Instance 20-145