Ping - Motorola RFS Series Reference Manual

3-10 Motorola RF Switch CLI Reference Guide

3.1.7 ping


User Exec Commands
Sends ICMP echo messages to a user-specified location
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
Syntax
ping {[<IP>|<hostname>]}
Parameters
ping {[<IP>|<hostname>]} Pings the specified destination IP address or hostname.
Example
RFSwitch>ping 192.168.2.100
PING 192.168.2.100 (192.168.2.100): 100 data bytes
128 bytes from 192.168.2.100: icmp_seq=0 ttl=128 time=2.7 ms
128 bytes from 192.168.2.100: icmp_seq=1 ttl=128 time=38.4
ms
128 bytes from 192.168.2.100: icmp_seq=2 ttl=128 time=4.6 ms
--- 192.168.2.100 ping statistics ---
3 packets transmitted, 3 packets received, 0% packet loss
round-trip min/avg/max = 2.7/15.2/38.4 ms
RFSwitch>ping
Target IP address:
When entered without any parameters, this command
prompts you for an IP/Host-name to ping.