Motorola RFS Series Reference Manual page 84

2-34 Motorola RF Switch CLI Reference Guide
pm sys-restart
prompt crash-info
radius restart
redundancy dynamic-ap-
load-balance start
set [command-history
|reboot-history|
upgrade-history]
show
terminal-length <0-512>
watchdog
Process Monitor
• sys-restart – Enables the PM to restart the system when
a processes fails
Enable crash-info prompt
• crash-info – Enables a crash-info prompt
Enable radius server
• restart – Restarts the radius server with an updated
configuration
Configure redundancy group parameters
• dynamic-ap-load-balance start – Enables the Dynamic
AP Load Balance feature
• start – Start dynamic AP load balance
Set service parameters.
• command-history <10-300> – Sets the size of the
command history (default is 200)
• reboot-history <10-100> – Sets the size of the reboot
history (default is 50)
• upgrade-history <10-100> – Sets the size of the upgrade
history (default is 50)
Shows running system information
• cli – Shows the CLI tree of the current mode
System wide terminal length configuration
• <0-512> – Number of lines of VTY (0 means no line
control)
Enables the watchdog