Debug - Motorola RFS Series Reference Manual

20.1.20 debug


Wireless Configuration Commands
Debugging functions for the Cellcontroller (wireless)
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
Syntax
debug cc [access-port|all|alt|ap-containment|ap-detect|
capwap|cluster|config|dot11|eap|ids|kerberos|l3-mob|loc-ap|
loc-mu|media|mobile-unit|radio|radius|self-heal|smart|snmp|
system|wips|wisp|wlan] {debug|err|info|warn}
Parameters
access-port
all
alt
ap-containment
ap-detect
capwap
cluster
config
dot11
eap
ids
kerberos
l3-mob
Sets the parameters for the access-port logs
Sets the parameters for all the modules
Sets the parameters for the address lookup logs
Sets the parameters for the ap-containment logs
Sets the parameters for the Rogue AP detection logs
Sets the parameters for the CAPWAP logs
Sets the parameters for the cluster related logs
Sets the parameters for the configuration change logs
Sets the parameters for the datapath logs
Sets the parameters for the 802.11x eap logs
Sets the parameters for the intrusion detection logs
Sets the parameters for the kerberos logs
Sets the parameters for the Layer-3 mobility logs
Wireless Instance 20-41