Motorola RFS Series Reference Manual page 78

2-28 Motorola RF Switch CLI Reference Guide
smart-rf [clear-
history|load-from-
file|replay|rescue|restore|
save-to-file|simulate]
start-shell
test
undefine ecspec
<SPECNAME>
Displays Smart-RF Management Commands
• clear-history– clears assignment history
• load-from-file – load record from file
• replay enable – set replay mode
• enable – enable replay mode
• rescue <MAC> – force rescue operation
• <MAC> – A single radio-mac-address, a single index
• restore <MAC> – remove any recovering operation on
given mode
• <MAC> – A single radio-mac-address a single index
• save-to-file – save records to file smart.bin
• simulate [coverage-hole|interference] – Simulate radio
events
• coverage-hole <1-4096> – Simulate coverage hole
• experienced-rate transmit-rate – Provide the
experienced rate in mbps
• transmit-rate [patter-11a|pattern-11b|
pattern-11bg|pattern-2-mbps] – Provide the
simulated MU's allowed transmit rates in
hexadecimal format
• pattern-11a – 11a Unit
• pattern-11b – 11b Unit
• pattern-11bg – 11bg Unit
• pattern-2-mbps – 2 Mbps Unit
• interference <MAC> – Simulate interference on radio
• <MAC> – A single radio-mac-address, a single
index
Provides shell access
Provides test parameters
Undefines non active Event Cycle Specification
• ecspec <SPECNAME> – Name of ECSpecs configuration