Motorola RFS Series Reference Manual page 821

admission-control voice
[max-mus <0-256>|
max-perc <0-100>|
max-roamed-mus <0-
256>|
res-roam-perc <0-100>]
adoption-pref-id
<0-65535>
adoption-policy
[allow|deny]
ampdu [min-spacing
[.25|.5|0|1|2|4|8]|
rx-limit [16383|32767|
65535|8191]|
tx-limit <0-65535>|
tx-enable {min-spacing
[.25|.5|0|1|2|4|8]|
rx-limit [16383|32767|
65535|8191]|
tx-limit <0-65535>}
Sets the admission control parameters for voice. The
following options are configured:
• max-mus <0-256> – Configure the maximum number of
MUs to be admitted
• max-perc <0-100> – Configure the maximum percentage
of air time allotted to voice traffic
• max-roamed-mus <0-256> – Configure the maximum
number of roamed MUs to be admitted
• res-roam-perc <0-100> –Configure the maximum
percentage of air time exclusively allotted to MUs that
have roamed. This value is calculated relative to the
max-perc value
Employs a preference identifier for this radio port. The radio
port is more likely to be adopted by a wireless switch that
is a preferred switch.
Specifies adoption policy. Select from :
• allow – Allows adoption
• deny – Denies adoption
Specifies the settings for the MAC Protocol frames. The
following properties are configured:
• min-spacing [.25|.5|0|1|2|4|8] – The spacing between
MPDUs received in microseconds
• rx-limit [8191|16283|32767|65535] – The receive buffer
limit in bytes
• tx-limit <0-65535> – The transmit buffer limit in bytes
• tx-enable {min-spacing [.25|.5|0|1|2|4|8]|rx-limit
[16383|32767|65535|8191]|tx-limit <0-65535>} –
Optional parameters for enabling transmitting A-MPDUs
Wireless Instance 20-75