Wireless Configuration Commands; Aap - Motorola RFS Series Reference Manual

20-6 Motorola RF Switch CLI Reference Guide

20.1.1 aap



Wireless Configuration Commands

Defines the AAP configuration
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
Syntax
aap [aap-version|auto-upgrade|config-apply|fwupdate|
include-config]
aap aap-version [aap5131|aap7131] <version-number>
aap auto-upgrade enable
aap config-aaply [def-delay|mesh-delay] <30-10000>
aap fwupdate [<1-
256>|<LIST>|filename|ipaddress|location|mode|password|stagge
rcount|unadopted|username]
Parameters
aap-version
[aap5131|aap7131]
<version-number>
auto-upgrade enable
The number of AAP's supported differ from switch to switch.
• RFS7000 – Supports up to 256 AAP's
• RFS6000 – Supports up to 64 AAP's
• RFS4000 – Supports up to 24 AAP's
Enables version number
• aap5131
• aap7131
• <version-number> – Configures minimum ap version
required for adoption. A firm version string in the
format X.X.X.X-XXXR
Enables automatic firmware upgrade of Adaptive AP on the
switch