Motorola RFS Series Reference Manual page 85

Usage Guidelines
The
service password-encryption
the old password. Refer the note below for more clarification.
NOTE: The
disable the encryption, now requires the user to know the old
password. The user will have to enter the old password to disable the
encryption.
Earlier, using
encryption and
plaintext.
Now, the user has to user
password key>
Example
RFSwitch#service diag ?
enable
identify
limit
period
tech-support-period
tech-support-url
RFSwitch#service diag enable
RFSwitch#service diag limit ?
buffer buffer usage warning limit
fan Fan speed limit
filesys file system freespace limit
load agregate processor load
maxFDs maximum number of file descriptors
pkbuffers packet buffer head cache
procRAM percent RAM used by a process
ram percent free RAM
routecache IP route cache usage
temperature temperature limit
RFSwitch#service diag limit buffer ?
128 128 byte buffer limit
set by the user cannot be disabled without knowing
no service password-encryption
no service password-encryption
show running config
no service password-encryption <old
to disable or change the password.
Enable in service diagnostics
identify this switch by flashing the
LEDs in a rapidly changing pattern
diagnostic limit command
Set diagnostics period
Set diagnostics tech-support-period
Set the URL to use during auto
generated technical support dumps
Common Commands
command used to
disabled the
displayed the passwords as
2-35