Chapter 9. Crypto-Ipsec Instance; Crypto Ipsec Config Commands - Motorola RFS Series Reference Manual

Use the
(config-crypto-ipsec)
securing data (esp-3des, esp-sha-hmac etc.).
To navigate to this instance, use the command
RFSwitch(config)#crypto ipsec transform-set
<transform-set-name> <encryption-type> <auth-type>
RFSwitch(config-crypto-ipsec)#
The transform set is assigned to a crypto map using the map's transform-set command. For
more details, see

9.1 Crypto IPSec Config Commands

The table below summarizes the
Command
show Displays running system information
mode Configures the IP Sec transportation mode
clrscr Clears the display screen
end Ends the current mode and moves to the EXEC mode
exit Ends the current mode and moves to the previous mode
help Describes the interactive help system
Crypto-ipsec Instance
instance to define the transform configuration for
crypto-map transform set
config-crypto-ipsec
Table 9.1 Crypto IPsec Command Summary
Description
on page 10-12.
commands:
Ref.
page 9-8
page 9-6
page 2-2
page 9-3
page 9-4
page 9-5