Tunneling - Motorola RFS Series Reference Manual

12.1.22 tunneling


Interface Config Commands
Sets protocol-over protocol tunneling.
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
Syntax
tunnel [destination <A.B.C.D>|source <A.B.C.D>|ttls <1-255>]
Parameters
destination <A.B.C.D>
source <A.B.C.D>
ttl<1-255>
Example
RFS6000(config-if)#tunnel destination 1.2.6.3
RFS6000(config-if)#
Destination of the tunnel packet.
• <A.B.C.D> – Specifies the IP address of the
destination.
Source of tunnel packets.
• <A.B.C.D> – Specifies the IP address of the source.
Sets time to live.
Interface Instance 12-37