Chapter 18. Dhcp Server Instance; Dhcp Config Commands - Motorola RFS Series Reference Manual

Use the
(config-dhcp)
with the switch.
To move to this instance, use the command.
RFSwitch(config)#ip dhcp pool <pool-name>
RFSwitch(config-dhcp)#
Also refer to Chapter 12, Interface Instance, Section 12.1.8 ip
configurations.

18.1 DHCP Config Commands

Table 18.1 summarizes
Command
address
bootfile
class
client-identifier
DHCP Server Instance
instance to configure the DHCP server address pool associated
commands:
config-dhcp
Table 18.1 DHCP Server Command Summary
Description
Defines the DHCP server include range
Assigns a boot file name. The bootfile name can
contain letters, numbers, dots and hyphens.
Consecutive dots and hyphens are not permitted
Associates a class with a pool and moves to the
DHCP pool class configuration mode
Uses an ASCII string as a client identifier
for other DHCP related
Ref.
page 18-4
page 18-5
page 18-6
page 18-9