Motorola RFS Series Reference Manual page 883

nac-server
[primary|secondary|
timeout]
nas-id <nas-id>
nas-port-id <port>
Configure a NAC server IP address and an optional
authentication port number.
• [primary|secondary] [<IP> {auth-port <port>}|radius-key
[0 <secret>|2 <secret>|<secret>]] – Primary server or
secondary server's IP address
• <IP> {auth-port <port>} – Set an EAP server IP address
and optional EAP server authentication port (default:
is 1812)
• radius-key [0 <secret>|2 <secret>|<secret>] – Create a
Radius server shared secret, up to 127 characters
• 0 <secret> – Password is specified as unencrypted
• 2 <secret> – Password is encrypted with password-
encryption secret
• <secret> – Configures a NAC server shared secret
• timeout <1-300> retransmit <1-100> – Sets the time the
switch waits for a response from the RADIUS server
before retrying. This is a global setting for both the
primary and secondary servers. The default timeout is 3
sec.
• retransmit <1-100> – Number of retries before the
wireless switch will give up and disassociate mobile
unit
• <1-100> – Retry count. The default value is 3.
The
Note:
RFSwitch(config-wireless)# nac-server
timeout<*> retransmit<*>
defined for an MU's timeout and retries. If the MU's time is
less than the server's, a fallback to the secondary server will
not work.
The nas-id of this wlan to be sent to the RADIUS server.
Maximum length of 256 characters.
The nas-port-od of this wlan to be sent to the RADIUS
server. Maximum length of 256 characters.
Wireless Instance
should be less than what is
20-137