Motorola RFS Series Reference Manual page 889

secure-beacon
• retransmit <1-100> – Sets the number of retries before
the wireless switch will give up and disassociate the
mobile-unit. Set a value in the range 1 to 100. The
default value is 3.
• server [primary|secondary] [<IP> {acct-port <port>}|
radius-key [0 <key>|2 <key>|<key>]] – Sets the primary or
secondary RADIUS server for the selected WLAN
• primary – Sets primary RADIUS server information
• secondary – Sets secondary RADIUS server
information
• <IP> – Sets the IP address of the RADIUS server
• acct-port <port> – Sets the optional radius server
accounting port. Default is 1813
• radius-key [0 <key>|2 <key>|<key>] – Sets the radius-
key for the RADIUS server
• 0 <key> – The key is sent unencrypted
• 2 <key> – The key is sent encrypted with the
password-encryption secret
• <key> – The shared key
• timeout <1-300> retransmit <1-100> – Sets the time
the switch waits for a response from the RADIUS
server before retrying. This is a global setting for both
the primary and secondary servers. The default value is
3 sec.
• retransmit <1-100> – Number of retries before the
wireless switch will give up and disassociate mobile
unit
• <1-100> – Retry count.The default value is 3.
• reauth <30-65535> – Enable periodic reauthentication of
all associated mobile-units.
• <30-65535> – The reauthentication interval in seconds
Does not include the SSID of this WLAN in beacon frames
Wireless Instance 20-143