Address - Motorola RFS Series Reference Manual

18-4 Motorola RF Switch CLI Reference Guide

18.1.1 address


DHCP Config Commands
Specifies a range of addresses for the DHCP network pool
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
Syntax
address range <low IP address> <high IP address>
Parameters
range <low IP address>
<high IP address>
Usage Guidelines
Use the
address
The DHCP server assigns IP address to DHCP clients from the address range. A high IP
address is the upper limit for providing the IP address, and a low IP address is the lower
limit for providing the IP address.
Use the
no address range
Example
RFSwitch(config-dhcp)#address range 2.2.2.2 2.2.2.50
RFSwitch(config-dhcp)#
Adds an address range for the DHCP server
• low IP address – Defines the first IP address in
• high IP address – Defines the last IP address in
command to specify a range of addresses for the DHCP network pool.
command to remove the DHCP address range.
the address range
the address range