Show - Motorola RFS Series Reference Manual

6.1.12 show


Crypto ISAKMP Config Commands
Displays current system information running on the switch
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
Syntax
show <paramater>
Parameters
?
Example
RFSwitch(config-crypto-isakmp)#show ?
access-list
aclstats
alarm-log
system
autoinstall
SWITCH NOTE: The following commands display only for
RFS6000 and RFS4000:
• power
The following commands display only for RFS7000 :
• port-channel
• static-channel-group
NOTE: For more details, see show on page 2-38
Displays all the parameters for which information can be
viewed using the show command
Internet Protocol (IP)
Show ACL Statistics information
Display all alarms currently in the
autoinstall configuration
Crypto-isakmp Instance 6-15