13.1.7 no
mst Config Commands
Negates a command or sets its defaults
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
Syntax
no [instance|name|revision]
Parameters
instance
name
revision
Usage Guidelines
The
command negates any command associated with it. Wherever required, use the
no
same parameters associated with the command getting negated.
Example
RFSwitch(config-mst)#no instance 10 vlan 20
RFSwitch(config-mst)#
RFSwitch(config-mst)#no name MyRegion
RFSwitch(config-mst)#
RFSwitch(config-mst)#no revision
RFSwitch(config-mst)#
Sets the MST Instance
• vlan – Delete the association of vlan with this instance
• <vlan-id> – List of vlan IDs
Assigns a name to the MST region
Defines the revision number for configuration information
Spanning tree-mst Instance
13-9