T ools and Parts Required
4 7 B
This section outlines the tools and miscellaneous parts likely to be required during the setup of an IP
Office system. Other tools may also be required.
Tools Required
1.
Pozidrive No. 1 screwdriver for removal of module covers.
2.
Cutter for cable ties.
3.
Pozidrive No. 4 screwdriver.
4.
Wrist-strap for anti-static grounding or similar.
5.
PC running Windows 2000/XP/2003.
During the Staging Installation later in this manual, we recommend that you use a customer PC
that will eventually remain on site. Ideally this will be the same PC that will be used as the
customers Feature Key server and or voicemail server.
6.
Indelible marker for cable labelling.
Parts Required
1.
Cable ties.
2.
Cabling labels.
3.
IP Office CD Pack
Contains IP Office Administration Applications CD, IP Office User Applications CD and IP Office
Engineers Toolkit CD.
4.
Technical Bulletins
Each IP Office software release is normally accompanied by a Technical Bulletin detailing special
installation requirements, known issues, etc. Various software releases and their associated
Technical Bulletins can also be obtained from http://support.avaya.com.
Installation Manual
IP Office 3.2
15-601042 Issue 14b (13th November 2007)
Planning
Page 61