Tools And Parts Required - Avaya IP Office Installation Manual

3.3 Tools and Parts Required

This section outlines the tools and miscellaneous parts likely to be required during the setup of an IP Office system. Other
tools may also be required.
Tools Required
1. o Pozidrive No. 1 screwdriver for removal of module covers.
2. o Cutter for cable ties.
3. o Pozidrive No. 4 screwdriver.
4. o Wrist-strap for anti-static grounding or similar.
5. o PC running Windows 2000/XP/2003.
During the Staging Installation later in this manual, we recommend that you use a customer PC that will eventually
remain on site. Ideally this will be the same PC that will be used as the customers Feature Key server and or voicemail
server.
6. o Indelible marker for cable labelling.
Parts Required
1. o Cable ties.
2. o Cabling labels.
3. o IP Office CD Pack
Contains IP Office Administration Applications CD, IP Office User Applications CD and IP Office Engineers Toolkit CD.
4. o Technical Bulletins
Each IP Office software release is normally accompanied by a Technical Bulletin detailing special installation
requirements, known issues, etc. Various software releases and their associated Technical Bulletins can also be
obtained from http://support.avaya.com.
IP Office Installation
IP Office
Planning: Environmental Requirements
15-601042 Issue 19l (06 November 2008)
Page 65