Avaya 4600 Series Installation Manual page 204

IP Office Installation
Phone Module V2 Connections
Ports Description
DC I/P DC power input port. Used for connection of the power lead from an Avaya earthed 60W
external power supply unit supplied with the expansion module. A locale specific
IEC60320 C13 power cord for the external PSU is required but is not supplied with the
module.
DTE 9-Way D-Type socket. For Avaya use only.
EXPANSION RJ45 Socket. Used for direct connection to an Expansion port on an IP Office control
unit using the Expansion Interconnect cable supplied with the module.
PHONE RJ45 socket. Used for connection of analog phones. Intended for two-wire analog
phones. For connection to 4-wire analog phones connection should be via a master
socket with ringing capacitors.
If connected to an out-of-building extension, the connection must be made via additional
IP Office Barrier Boxes in addition to the buildings primary protection. The module must
also be connected to a protective ground.
Protective Ground point. Use of a protective ground is required for all installations, see
Grounding (Earthing). Where the module is connected to analog extensions in another
building, an IP Office Phone Barrier Box V2 (101V) is required at both ends, see
Lightning Protection/Out-of-Building Connections.
All expansion modules are supplied with a base software level and should be upgraded to match the
core software of the control unit in the IP Office system.
Item
IP400 Phone 8 V2
IEC60320 C13 Power Cord
Rack Mounting Kit
Expansion modules include an external power supply unit (PSU) and an appropriate interconnect cable.
They do not include a locale specific power cord for the external PSU or any phone extension cables.
Installation Manual
IP Office 3.2
Variant Country
8 Ports All
16 Ports
30 Ports
CEE7/7 Europe
BS1363 United Kingdom 700289747
NEMA5-15P America
China China
All
15-601042 Issue 14b (13th November 2007)
SAP Code
700359896
700359904
700359912
700289762
700289770
700261977
700210800
Page 204