Additional Processes; Creating A Wan Link - Avaya 4600 Series Installation Manual

Hide thumbs Also See for 4600 Series:
Table of Contents

Advertisement

D . Additional Processes
7 B
C reating a WAN Link
8 2 B
The following is a simplified process for creating a data link from Site A to Site B via the WAN ports.
At Site A on IP address 192.168.43.1.
1. Create a Normal Service:
The Service name can be any text and is used to identify this particular service. The account
Name and password entered for the service are presented to the remote end, therefore must
match the user name and password configured at Site B. The Encrypted Password option can
only be used if the remote end also supports CHAP.
2. Create a User:
Under the Dial In tab, tick Dial In On. This User account is used to authenticate the connection
from the Site B. Note that if the Service and User have the same name these two configuration
forms are automatically linked and become an Intranet Service. The User password is displayed
at the bottom of the Service tab as the Incoming Password.
3. Setup RAS:
If CHAP is to be used on this link then the Encrypted Password option must be checked in the
Service and in the RAS service. The name of the RAS service must match the name of the
Service at Site B. Note that if the RAS settings are given the same name as the Service and User
they are automatically linked and become a WAN Service. Ensure that the Encrypted Password
option is not checked when using a WAN Service.
4. Edit the WANPort:
Note: Do not create a new WANPort, this is automatically detected. If a WANPort is not
displayed, connect the WAN cable, reboot the Control Unit and receive the configuration. The
WANPort configuration form should now be added.
5. Create an IP Route:
In the IP Address field enter the network address of the remote end, not the IP address of the
Control Unit. Under Destination select the Service created above.
At Site B on IP address 192.168.45.1
1. Repeat the above process but altering the details to create a route from Site B to Site A
Installation Manual
IP Office 3.2
15-601042 Issue 14b (13th November 2007)
Page 141

Advertisement

Table of Contents
loading

This manual is also suitable for:

5600 seriesIp office 3.2

Table of Contents