4. Installation
4.1 Tools and Parts Required
The following is a general summary of the tools required. Additional tools and equipment will be
required for wall and or rack mounting and to fashion ground cable connections suitable to local
requirements.
· Tools Required
· o 5mm Flat-blade screwdriver.
· o Crosshead screwdriver.
· o Anti-static wrist strap and ground point.
· o RJ45-RJ45 Ethernet LAN Cable.
· o M4 Cross-Head Screwdriver.
· o Tools suitable for crimping a cable spade.
· o If wall mounting, drills and tools for wall mounting fixtures.
· Additional Parts Required
In addition to orderable IP Office equipment, the following items will be required.
· o 14AWG Solid copper wire for ground connection of control units and expansion modules.
· o Cable sleeve matching local regulator requirements for ground wires. Typically green for a functional ground
and green/yellow for a protective ground.
· o If wall mounting, additional 4.5mm diameter fixtures and fittings suitable for the wall type.
· o Cable ties and labels for tidying and identifying cables.
· PC Requirements
1. o
Windows PC with IP Office Admin suite installed
2. o SD Card reader.
PARTNER Version Installation Manual
IP Office Essential Edition
and RJ45 Ethernet LAN port.
Page 40
- Issue 1c (09 April 2010)