Avaya 4600 Series Installation Manual page 128

IP Office Installation
Procedure
Using IP Office Manager, if only button programming changes are required, the configuration changes
can be merged back to the IP Office system without requiring a reboot.
1. Using Manager load the current configuration from the IP Office.
2. Select the
3. Select Button Programming.
•
The number of button displayed is based on the phone associated with the user when the
configuration was loaded. This can be overridden by selecting Display All Buttons. This
may be necessary for users who switch between different phones using hot desking or
have an expansion unit attached to their phone.
4. For the required button, either select the button and then click Edit or double-click the button.
5. Edit the settings as required. Use the ... button to display the menu for selecting the required
button action. Select the action and set the action data, then click OK.
6. Click OK. Repeat for any other buttons.
7. Click OK.
An alternate method for the above programming is to right-click on the various fields. To do this start with
the Action field, then Action Data and then Label if required.
Installation Manual
IP Office 3.2
User required to display their configuration details.
15-601042 Issue 14b (13th November 2007)
Page 128