Ip403 Control Unit - Avaya 4600 Series Installation Manual

I P403 Control Unit
1 4 4 B
The front panel of the IP403 control unit includes eight digital extension (DS) ports, two analog phone
(POT) ports and an eight port 10/100Mbps Ethernet LAN hub. The IP403 has been superseded by the
IP406 V2 control unit but is still supported on IP Office 3.2.
IP403 control units with integral DT rather than DS ports are still supported. However use of devices on
those ports is not supported.
Feature
Maximum
Extensions
Conference Parties
Trunks Cards
VCM Card Slots
Data Channels
Locales
Software Level
Power Supply
Mounting
Dimensions
Weight
Maximum
Configuration Size
Installation Manual
IP Office 3.2
Capacity
100 of various types in combination. Analog only: 92. DS only: 98. IP
only: 100.
64.
2 Trunk card slots. All types supported except Dual PRI trunk cards.
1 up to maximum voice compression channels capacity of 20 channels.
20 of which 10 usable for Voicemail Pro/TAPI WAV connection sessions
(subject to available Voicemail Pro Port and TAPI WAV licenses).
Supported in all IP Office locales.
•
IP Office core software level 1.0 minimum.
•
Bin file = ip403.bin.
•
DT Port Support: IP Office 3.0 and higher software does not
support the use of DT ports. IP403 DT modules are supported on IP
Office 3.0 but use of the integral DT ports is not supported.
The unit is supplied with a 2-Pin, 40W external power supply unit. The
PSU has an integral power cord for connection to the unit's DC I/P
socket. A locale specific IEC60320 C7 power cord for the external PSU is
required but is not supplied with the unit.
The unit is designed as a free-standing module that can be stacked on or
under other IP Office modules. The unit can be rack mounted in a 19"
rack system using the optional Rack Mounting Kit.
Width: 445mm/17.5". Depth: 245mm/9.7". Height: 71mm/2.8".
Unboxed: 2.5Kg/5.8lbs. Boxed: 3.85Kg/8.6lbs.
192KB.
15-601042 Issue 14b (13th November 2007)
System Components
Page 183