Installing The Ip Office Mib Files; Hp Open View Network Node Manager - Avaya 4600 Series Installation Manual

I nstalling the IP Office MIB Files
1 3 1 B
To allow full communication between an SNMP agent and an SNMP manager, the SNMP manager must
load MIB files (Management Information Base) specific to the SNMP agent device and the features it
supports. These MIB files contain details of the information the agent can provide and the traps that it
can send. Full details of the structure of the IP Office MIB files, MIB groups within those files and event
traps can be found in the "IP Office Installation Manual".
The MIB files for IP Office operation are included on the IP Office Admin CD in the folder
C:\smnp_mibs. The actual files required and the method of loading depend on the SNMP manager
application being used. The details below cover the two SNMP manager applications tested.
H P Open View Network Node Manager
2 6 0 B
1. Copy the following MIB files to the applications MIBs folder.
MIB File
a. rfc2737-entity-mib.mib
b. avayagen-mib.mib
c. ipo-prod-mib.mib
d. ipo-mib.mib
e. inet-address-mib.mib
f. rfc2213-integrated-services-mib.mib snmp_mibs\standard folder on OpenView Install CD.
g. diffserv-dscp-tc.mib
h. diffserv-mib-hpov.mib
i. ipo-phones-mib.mib
2. Start the OpenView Network Node Manager console.
3. Select Options and then Load/Unload MIBs: SNMP.
4. Select Load and select all the MIB files listed above.
5. Select Compile.
Installation Manual
IP Office 3.2
Source
snmp_mibs\standard folder on OpenView Install CD.
snmp_mibs\IPOffice folder on IP Office Admin CD.
snmp_mibs\IPOffice folder on IP Office Admin CD.
snmp_mibs\IPOffice folder on IP Office Admin CD.
snmp_mibs\Standard folder on IP Office Admin CD.
snmp_mibs\Standard folder on IP Office Admin CD.
snmp_mibs\Standard folder on IP Office Admin CD.
snmp_mibs\IPOffice folder on IP Office Admin CD.
15-601042 Issue 14b (13th November 2007)
D. Additional Processes
Page 161