Ip400 Phone Module - Avaya 4600 Series Installation Manual

I P400 Phone Module
1 6 1 B
The IP400 Phone module (also known as the Phone V1 module) is used to add additional POT ports to
an IP Office system. POT ports are used for analog phones.
The Phone module is available in 8, 16 and 30 port variants, referred to as the Phone 8, Phone 16 and
Phone 30 respectively. The IP400 Phone Module has been superseded by the Phone Module V2.
•
With IP Office 3.1, the message waiting indication (MWI) on each POT port can be configured for
None, On, 51V Stepped, 81V, Line Reversal A or Line Reversal B. On uses the default
determined by the system locale. POT ports on a Phone V2 module can additionally be
configured for 101V operation.
Feature
Supported on
Locales
Software Level
Included
Power Supply
Mounting
Dimensions
Weight
Installation Manual
IP Office 3.2
Details
All IP Office control units except Small Office Edition.
Supported in all IP Office locales.
IP Office core software level 1.0 minimum. Bin file = napots16.bin.
Power supply unit (see below) and Expansion Interconnect cable.
The module is supplied with a 2-pin, 40W external power supply unit.
The PSU has an integral power cord for connection to the module's DC
I/P socket. A locale specific IEC60320 C7 power cord for the external
PSU is required but is not supplied with the module.
The module is designed as a free-standing module that can be stacked
on or under other IP Office modules. The module can be rack mounted in
a 19" rack system using the optional Rack Mounting Kit.
Width: 445mm/17.5". Depth: 245mm/9.7". Height: 71mm/2.8".
Unboxed: 3.1Kg/6.94lbs. Boxed: 4.4Kg/9.7lbs. (Based on Phone 30 V2)
15-601042 Issue 14b (13th November 2007)
System Components
Page 205