Parallel Port / Usb Feature Key Installation - Avaya 4600 Series Installation Manual

IP Office Installation
P arallel Port / USB Feature Key Installation
1 2 7 B
1. Plug the Feature Key dongle into the PC's parallel or USB port.
2. Insert the IP Office Administrator Applications CD and let the installation wizard auto-start.
3. If some IP Office administrator application have been previously installed, select Modify when
the Modify, Repair or Remove option menu appears.
4. In the Select Features menu, ensure that Feature Key Server is selected. Do not change any
other options as this will trigger their removal if already installed.
5. Having installed the software, the system will reboot.
•
The Feature Key Server installs itself as a service. It appears as Key Server in the
Services Panel.
•
In the Add/Remove Programs panel, an entry Sentinel System Driver appears. This is
part of the Feature Key Server.
6. Following installation and reboot, the Feature Key Server appears as an icon
System Tray.
•
Right-click on the icon and select About to display the server software version and the
Feature Key device number.
•
If the icon appears as a white block with a red cross through it, then there is some error.
The most likely error is that the Feature Key is missing from the parallel or USB port.
7. Start Manager receive the IP Office system's configuration.
8. Select System.
9. On the System tab, the License Server IP Address field is used to set the location of the
feature key. The default is a 255.255.255.255 broadcast address. This is okay for many sites, but
it is recommend that the IP address of the PC running the Feature Key Server is entered.
10. Click OK.
11. Select License.
12. To add a license, click
13. The Status of the new license should show Unknown and name the license as expected. If its
Status is Unknown and name Invalid, the most likely cause is incorrect entry of the license key
characters.
14. Click on to send the configuration back to the IP Office. The menu that appears will indicate
whether a reboot is required.
15. Use Manager to receive the configuration again and check that the status of the license. It should
now be Valid.
Installation Manual
IP Office 3.2
and select License. Enter the new license click OK.
15-601042 Issue 14b (13th November 2007)
in the Windows
Page 156