Avaya 4600 Series Installation Manual page 79

Procedure: Installing the IP Office Admin Applications
1. Using the Add or Remove Programs option in the Windows Control Panel, check that the PC
does not already have a version of the IP Office Admin suite installed.
•
If 'yes' and the suite is a pre-IP Office 3.2 version, remove the existing IP Office Admin
suite via Add/Remove Programs.
•
If the existing suite is IP Office 3.2 or higher, it is possible to upgrade without removing
the previous installation.
2. Insert the IP Office Administrator Applications CD. The installation process should auto start. If it
does not auto start, open the CD contents and double-click setup.exe.
3. Select the language you want to use for the installation process. This does not affect the
language used by Manager which will attempt to match your Windows regional setting. Click
Next >.
4. Select whether only the current Windows logon account should be able to run the Admin Suite
applications or whether they will be available to all users of the PC. Click Next >.
•
The previous selection does not affect the IP Office Feature key server application, if
installed. That application runs as a service whenever the PC is running.
5. If required select the destination to which the applications should be installed. We recommend
that you accept the default destination. Click Next >.
6. The next screen is used to select which applications in the suite should be installed. Clicking on
each will display a description of the application. Click on the
change the installation selection. When you have selected the installations required, click Next >.
a. For IP Office system installations, ensure that at minimum System Monitor and Manager
are selected.
b. Only select Voicemail if this PC will also be the customer's Voicemail Lite server PC.
c. Deselect Feature Key Server unless this PC will be hosting a Parallel port or USB port
Feature Key dongle for the customer's IP Office system.
7. Click Install.
8. Installation of Windows .Net2 components may be required. If dialogs for this appear, follow the
prompts to install .Net.
9. If requested, reboot the PC.
10. Proceed to Stage 3. Control Unit Power Up.
Installation Manual
IP Office 3.2
next to each application to
15-601042 Issue 14b (13th November 2007)
A. Basic Installation
Page 79