E Xpansion Ports; E Xpansion Interconnect Cable - Avaya 4600 Series Installation Manual

E XPANSION Ports

2 3 6 B
This type of port is found on the rear of IP Office control units and external expansion modules. It is used
for connecting the external expansion modules to there parent IP Office control unit.
The connection between these ports should only be done using an Avaya Expansion Interconnect Cable.
No other cable type should be used.

E xpansion Interconnect Cable

2 7 0 B
The Expansion Interconnect cable is used to link expansion ports between the IP Office control unit and
external expansion module (except WAN3 modules).
•
WARNING: This is the only cable that should be used for connecting an IP Office control
unit to external expansion modules (except for WAN3 modules).
•
Supply: One cable is normally supplied with each external expansion module.
•
SAP Code: 700213457
Installation Manual
IP Office 3.2 15-601042 Issue 14b (13th November 2007)
System Components
Page 287