System Start Up; Overview; Required Information; Standalone - Avaya BCM50 User Manual

Rls 6.0 system start up

Hide thumbs Also See for BCM50:

Table of Contents

BCM50 System Start Up

System Start Up

This guide details the steps required to set the BCM to a basic working state.

When the procedures described in this document have been applied the BCM

will be able to perform basic call operations, and the system will then be ready

for further configuration such as Telephony Services, Contact Centre, etc.

It is assumed that the BCM has been installed and connected to a power

supply before starting this guide.

Obtain the following parameter values from the customer's network

administrator. The information required depends on what type of network the

BCM is to be installed in.

In this situation, the BCM is connected directly to a PC.

The required information for this situation would be:

 BCM System ID

 BCM Name

 Telephony Region

 Time Zone

 Time Source

NN40010-318 Issue 1.2 BCM50 Rls 6.0

Table of Contents