Ip Office Core Software (Bin Files) - Avaya 4600 Series Installation Manual

IP Office Installation
I P Office Core Software (BIN Files)
3 2 B
Each IP Office control unit and expansion module contains and runs its own part of the IP Office core
software. These parts take the form of .bin files (binary files).
Modules are supplied with a base level of core software .bin files loaded. Currently this base level is IP
Office 2.1. Therefore one of the first steps of the installation process is to upgrade the modules from this
base level to the level of IP Office core software required, for example IP Office 3.1.
The .bin files for each IP Office software level are included on the IP Office Administrator Applications
CD for that software level. They are installed from that CD as part of the IP Office Manager application.
IP Office Manager can then be used to upgrade the .bin files loaded in the modules within an IP Office
system.
Updated sets of software and bin files may also be made available through the Avaya support web site.
See Web Sites.
•
Software Level
The IP Office core software level is expressed in the form X.Y(Z), for example 2.1(27), where X is
the major software level, Y is the minor level and Z is the build number.
The following rules apply to the core software level used by modules within an IP Office system and
between linked IP Office systems.
•
All modules within an IP Office should run the same level of core software. Doing otherwise will
lead to misoperation of the system.
Installation Manual
IP Office 3.2 15-601042 Issue 14b (13th November 2007)
Page 38