Factory Default; Exit Programming - Bosch ICP-EZM2 System Reference Manual
Easy series control panel
Hide thumbs
Also See for ICP-EZM2:
- Installer's manual (80 pages) ,
- System reference manual (126 pages) ,
- Quick start manual (24 pages)
Table of Contents
Advertisement
62
en | Programming
5.2.10
Factory Default
Programming Item
Factory Default
Warning!
!
For NF A2P installations, once the control panel is configured, check that all parameters are
within the range of authorized values. Refer to EN50131 Requirements, page 11.
5.3
Exit Programming
Press [#] repeatedly until the system says "goodbye." This ends the phone session.
2014.09 | 01 | F.01U.306.221
Item
Selections
Number
9999
Enter 9999 to restore all factory default values. All programming items,
except for the country code, are reset when you restore the factory
default values. This item also deletes all wireless data.
System Reference Guide
Easy Series Control Panel
Bosch Security Systems, Inc.
Advertisement
Table of Contents
