Bosch ICP-EZM2 System Reference Manual page 8

8 en | Agency Approvals and Requirements
–
–
Quick Reference
Refer to the following table for programmable features, shipping defaults, and recommended
programming that comply with the ANSI/SIA CP-01 False Alarm Reduction standard.
The system test button tests all points, all outputs, the control panel, and the communicator.
Refer to Test the System, page 66 for more information.
Paragraph Feature
Number in
ANSI/SIA CP-01
4.2.2.1 Exit Time
4.2.2.2 Progress
Annunciation/
Disable for Silent
Exit
4.2.2.3 Exit Time Restart
4.2.2.5 Auto Stay Arm on
Unvacated
Premises
4.2.4.4 Exit Time and
Progress
Annunciation/
Disable for
Remote Arm
4.2.3.1 Entry Delay(s)
4.2.5.1 Abort Window for
Non-fire Zones
4.2.5.1 Abort Window
Time for Non-fire
Zones
4.2.5.1.2 Abort
Annunciation
4.2.5.4.1 Cancel
Annunciation
2014.09 | 01 | F.01U.306.221
Sends a Recent Closing report for any alarm that occurs within two minutes of the end of
Exit Delay
Includes a Fire Verified point type option that is disabled by default
Requirement
Required
(programmable)
Allowed
Required Option
Required
option(except for
remote arm)
Allowed option
(for remote arm)
Required
(programmable)
Required option
Required
(programmable)
Required option
Required option
System Reference Guide
Range Shipping
Default
For full or auto 60 sec
arming: 45 sec to2
min (255 sec max)
Individual control All control
centers can be centers
disabled. enabled.
For re-entry during Enabled
Exit Time
If no exit after full Enabled
arm
Can be disabled Enabled
for remote arm
30 sec to 4 min 30 sec
2
Can be disabled Enabled
by zone or zone
type
15 sec to 45 sec 30 sec
2
Annunciate that no Enabled
alarm was
transmitted
Annunciate that a Enabled
Cancel was
transmitted
Easy Series Control Panel
Recommended
Programming
1
60 sec
All control
centers enabled.
Enabled
Enabled
Enabled
At least 30 sec
2
Enabled (all
zones)
At least 15 sec
2
Enabled
Enabled
Bosch Security Systems, Inc.