Table of Contents
Advertisement
D7024 | Operation and Installation Guide | 7.0 Control Panel Programming
7.7.3
BFSK Report Codes
When BFSK reporting is used, most reporting codes are
fixed and do not require programming. The control
panel can send the following reports (Table 29) that are
programmed, non-standard BFSK codes.
Table 29:
BFSK Reports
Report
Description
Off-normal at
Sent when the control panel is off-normal at
Test
the Automatic Test time.
Open Reset
Sent when you press [RESET].
Report
Silence
Sent when you press [SILENCE].
Fire Drill, Fire
Sent for fire drill operations.
Drill Restore
BFSK RPT CDS
1- OFF NORM TEST
2- OPEN/RESET
3- SILENCE
4- FIRE DRILL
5- FR DRIL RSTR
Press the number key corresponding to your report
code selection. A window allowing you to entry two
hexadecimal digits appears.
7.7.4
SIA Silent Report
When using SIA reporting, all reporting codes but one
are fixed and do not require programming (the SIA
Silent Report is not a standard SIA Code).
All data is entered has hexadecimal values. Enter the
required ASCII value using hexadecimal numbers, one
for the left character or byte and one for the right
character or byte. Use the factory default KB = 0 x 4B,
0 x 42 (refer to the Standard Table of ASCII Values).
SIA SIL RPT
1- LEFT BYTE
2- RIGHT BYTE
54
1.
Press [1] to select the left byte, enter the digits, and
press [#].
LEFT BYTE (____)
0 THRU 9
<HISTORY>
<TEST>
<DISABLE>
<DRILL>
<SILENCE>
<RESET>
2. Enter the right byte the same way you enter the left
byte.
7.8
History Defaults
Shortcut:
0-PROG > 8-HSTRY DEFLTS
The following window appears:
PROG DEFAULTS
1- CLEAR HSTRY
2- DEFAULT EE
3- ALT 4/2 CDES
4- (reserved)
7.8. 1
Clear History
Shortcut:
0-PROG > 8-HSTRY DEFLTS > 1- CLEAR
HISTORY
You can clear some or all History records in the system
using this menu item. The following window appears:
HIST ITEMS=____
DEL OLDEST 000
Enter the number of History records you want to delete,
and press [#]. The preceding menu appears.
7.8.2
Default EE
Shortcut:
0-PROG > 8-HSTRY DEFLTS > 2- DEFAULT EE
Use this option to set the control panel to its original
factory-programming configuration. You are prompted
to press [#] to complete the operation, or you can press
[*/CLEAR] to not complete the default.
A
B
C
D
E
F
Bosch | 7/05 | 31499J
Advertisement
Table of Contents
