Programming Access Options; System Access By Phone - Bosch ICP-EZM2 System Reference Manual

38 en | Programming Access Options
4

Programming Access Options

You can access the system to make programming changes using:
–
–
–
4.1

System Access by Phone

Notice!
Once you configure a control panel using the Phone Menus, you can copy the programming
from the control panel to a programming key for use on another control panel, or for backup.
Refer to Programming Keys, page 41.
The Installer Phone Menu and User Phone Menu provide access to system functions such as
testing the system, programming the system, and adding or changing users.
The Installer Phone Menu requires the installer passcode.
The User Phone Menu requires either the master user (User 1) passcode for full menu access,
or a user passcode for limited menu access.
If the passcode length = four digits:
–
–
If the passcode length = six digits:
–
–
To access the system menus, select one of the options shown in the table Phone System
Access Options.
2014.09 | 01 | F.01U.306.221
The Phone Menu
Remote Programming Software (RPS)
A Programming Key (using programming copied from a control panel previously
programmed using the Phone Menu or RPS)
The default installer passcode is 5432
The default master user passcode is 1234
The default installer passcode is 543211
The default master user passcode is 123455
System Reference Guide
Easy Series Control Panel
Bosch Security Systems, Inc.