User Phone Menu - Bosch ICP-EZM2 System Reference Manual

Easy Series Control Panel
2.3.2

User Phone Menu

1
Turn System On or Off
Only use this option
on non-UL systems.
2
Two-Way
Enter user
passcode
Voice Session
1
Phone
Menu
3
System
Maintenance
4
User Menu
Only the Master User can
access the full User Menu.
Users 2 to 21 can only change
their own passcode.
5
Operate Outputs
To turn an output on or off, press the
corresponding number key on the phone.
#
Exit
End phone session.
Only a user passcode (Users 1 to 21) can access the User Menu.
1
If the system is on, the System Maintenance option is not available.
2
Bosch Security Systems, Inc.
Turn system on and stay inside
1
Turn system on and leave
2
3 Turn on custom protection
To hear this option, custom protection must be
enabled.
# Exit
Talk to person at control center
1
2 Listen to person at control center
# End voice session
1 Set date and time
Full system test
2
System test menu
3
2
Event history
4
Reset system
5
# Exit
}
1 Add new user
To add or change a user:
Change user
2
3 Delete user
3
Exit
#
System Reference Guide
}
The voice session only lasts 90 seconds.
To reset the timer, press [1] on the phone during talk mode,
or [2] during listen mode.
Warning device test
1
Battery test
2
3 Communication test
4 Control center test
5 Point test
Operate outputs
OR
6
Expert Programming (Enable Installer Access)
Exit system test menu
#
1 Most recent events
Events by date
2
3 Last alarm event
4 Last 10 events
# Exit
Change token
1
Record description
2
Change passcode
3
Change key fob
4
# Exit
Overview | en 23
4
1 Continue
2 Try again
2014.09 | 01 | F.01U.306.221