20
en | Overview
System component placement in enclosure
Figure 2.1: Overview of the System Component Location for the ICP-EZM2-EU Enclosure
Callouts - Description
1
Port for ICP-EZRU-V3 ROM Update Key and Programming Key
2
Enclosure Cover and Wall Tamper Switch
3
Ground connection
Connect ground wire from enclosure to enclosure door.
4
Module mounting location
5
Module mounting location
6
System test button
When the system is completely installed and programmed, press the system test button to start a full
system test.
7
Port for ICP-EZVM voice module
2014.09 | 01 | F.01U.306.221
5
3
4
System Reference Guide
6
7
12 VDC
Easy Series Control Panel
1
2
Bosch Security Systems, Inc.